Hi,
I would like to know if we have user-exit's to map custom strategy group or custom strategy in ECC with standard planning strategy in APO.
For exam[le when I CIF material with custom strategy 'Z10' /strategy group 'ZS' the product master in APO should have the standard proposed strategy '10' in the demand tab.
Thanks in advance for your help.
Regards
PK
Hello:
We are about to Go Live with an SNP Implementation. Part of that is to CIF Routings and Recipes from ECC to APO and have PDSs created. All Routings are CIF'ing properly. For each operation in the Routing, a Work Center might call for Setup in the Scheduling Formula and we might have a rate for this Setup in the Standard Values of the Operation or we might not, but the CIF still sends the PDS either way.
However, we are observing a different situation on the Recipes. If an operation in the Recipe is using a Work Center which has "Duration" in its Scheduling Formula and we do not have a rate in the Duration in the Standard Value of that Operation, then the CIF will fail. If we add a rate on the Duration activity, then it sends the PDS.
Do you know if this is a bug or intended to work this way? (Requiring a rate greater than zero for the Duration Activity in the Scheduling Formula, but not for other Activities).
Thanks.
Andrea
Hello Experts,
We have setup process chain alert for few PC with a standard message.
However apart from messgae, we are receiving log in the mail.
How to avoid log and receive only message mentioned ?
EHP2 FOR SAP SCM 7.0
Thanks in Advance
Hi Experts,
I created a DP backup cube. Everything is straightforward. No routines or rules. Only direct mapping from planning area. However, am getting wrong data in the cube. Unit of measure is also the same. What could have been the issue.
Hoping for your help.
Thanks! Sincerely, Ria
Hi
That is what the log on a macro in background job (process chain) says
What are the probable root causes here ?. NO one is locking any data. Not even system.
Thanks
Lok
Hi
could you please let us know how we would configure the shelf life scenario in APO SNP we will try to updated batch and class from in snp through
R3. We have get the date from ECC batch and class.But when we view the SL date of batch in RRP3 T-code in element tap it is not populated.it has show 01.01.1970 along with batch.
Please let me know how it populate the 01.01.1970.
Hi,
In the standard planning book 9ASNP94 (Planning view SNP94(2)), there is a key figure 'Quantity Stored' (9ASTOCK).
Please suggest what is the source of the information stored in this KF & where the calculations are stored. I could not see any Macro for this purpose.
I also understand that this KF may be copy of KF 'Projected available stock' but i am not able to get more information on this.
Request to provide your input on this.
regards,
Mohit
Hi
We have three work centers, A, B &C, on a production line and we produce multiple materials. However not every resource is a bottle neck in production of every material.
For example
to produce material M1, work center A may be bottleneck, B and C are not
to produce another material M2 work center C may be bottleneck, A and B are not.
We need to create the routing/master recipe with all three work centers but want to send only bottle neck work center A into APO's SNP PPM/PDS for material M1 and only work center C into APO's SNP PPM/PDS for material M2.
Please advise how this could be done.
Thanks.
Hi All,
We recently had APO service pack upgrade from SCM 7.02 SP8 to SCM 7.02 SP15.
Post upgrade, we are seeing CIF queues of FC* type is getting generated and are in READY state in SMQ2 in APO.
We do not have FC* registered in SMQR in APO.
We did not get these CIF queues before upgrade.
I went through the below link.
http://help.sap.com/saphelp_em70/helpdata/en/6f/785e3f71e41e26e10000000a114084/content.htm
Is anybody familiar with FC* CIF queues and what is the impact if we register them in SMQR in APO?
Look forward to your quick response.
Thanks in advance,
Ehsan Ahmed
Currently we have transaction /SAPAPO/SDPPLBK as transportable. We need to make it client specific and allow users to update it in production instead of importing it from development to production
Regards
Gurudutt Sawant
There are four products at one location In our planning book Forecast Key figure is updated with incorrect data . But we are not able to find the root cause on it.
User said there is no manual update from them on this forecast key figure.
I have checked the planned independent requirements haven't come from ECC system.
Checked the process chain which releases forecasts from DP to SNP , but it doesn't have the material which we are looking into.
Kindly guide me with your reply.
Hi Experts,
can any one explain what is planning area back up and why we will use
and directly how do you upload the data from ECC to apo
and if we have sales history in xl file how do you assign it to directly to planning area keyfigures
Thanks,
Sravani
hello Friends we plan to upgrade to SCM 7.03 as part of a upgrade project of ECC and others , we would like to know experiences if some one has already done upgrade to SCM 7.03 , please share.
we are currently at SCm 7.01 , BI at 702 , Live Cache at release 70 build 20 and optimizer at 10
Dear Experts,
The clandestine table /1SAPAPO/S000***** does not have selection entries despite tons of valid selections - imported and locally created ones too.
Is there some secret program out there to write valid selection entries to this table ? The selections are used in tons of macros incl. Alert macros but the S table is blank (well contains some couple of defunct entries that are not a part of the universal set I am interested in)
Thanks
Lok
Hello Experts,
I just need a hand on this.
so here's the issue, the selection was already deleted in the Transaction /SAPAPO/MSDP_FCST2, supposedly the selection ID has already been deleted in the transaction ZD_FCST_PROFILES, but upon checking, the selection ID is still present. what possible step do i need to do?
Hope someone can help me on this
Hi Gurus,
I am using /sapapo/lcout for sending Deployment result to Demand Planning. The problem is system is sending results on the basis of the recept date. I want to send the same on the Start Date at the plant. Is it Possible. Example is given below
Transit time from Plant to Warehouse is 7 Days, Plant despatch material on 1st (Start Date) and Warehouse is Recing on 7th(Availabilit)
if i copy the deployment result it copies on 7th that is the availability. I want the result should be copied to 1st Start Date instead of 7th to the warehouse.
Urgent help is hightly appreciated.
Thanx in advance
AJ
Hi
We have to write a macro where we need to identify the current calendar month we are in and make all the weeks in the month read only for users. The data view we are dealing is in weekly buckets.
I see the that we have functions such as MONTH_BDATE() and MONTH() functions but don't know how to link them.
Appreciate any suggestions.
We have a requirement to transfer the forecast that exists in ECC as a type VSF into APO. It needs to be visible in the product view. I have created and activated an integration model to transfer the forecast, but the forecast is not visible in the product view.
Any suggestions on how to resolve this would be greatly appreciated.
Thanks
Hello All,
Need your urgent input please.
We are trying to make use of Supply Chain Cockpit(SCC) and different predefined KPIs available with it. As per our understanding, these KPI queries pull actual and historical performance data from the SAP BW for viewing it in the SCC.
Please let us know Are there any Predefined KPIs available? If yes, Where can we find the list of those Predefined KPIs?
Additionally, any help in - how to set up SCC to make use of predefined KPIs (or user-defined KPIs) will be highly appreciated too.
Looking forward to your inputs.
Thanks in advance.
Best Regards
Satish Waghmare
Hello:
We are about to Go Live with an SNP Implementation. Part of that is to CIF Routings and Recipes from ECC to APO and have PDSs created. All Routings are CIF'ing properly. For each operation in the Routing, a Work Center might call for Setup in the Scheduling Formula and we might have a rate for this Setup in the Standard Values of the Operation or we might not, but the CIF still sends the PDS either way.
However, we are observing a different situation on the Recipes. If an operation in the Recipe is using a Work Center which has "Duration" in its Scheduling Formula and we do not have a rate in the Duration in the Standard Value of that Operation, then the CIF will fail. If we add a rate on the Duration activity, then it sends the PDS.
Do you know if this is a bug or intended to work this way? (Requiring a rate greater than zero for the Duration Activity in the Scheduling Formula, but not for other Activities).
Thanks.
Andrea